Panasonic KX-TCD952EB Telephone User Manual


 
Chapter 4
39
Multi-Unit User Operations
Selecting all handsets
When a call is received, all handsets will ring at
the same time.
1 Press then .
2 Press .
3 Enter the base unit password (p. 27).
4 Press .
5 Press .
A confirmation tone sounds and the
display will return to the stand-by mode.
PROG
1
1
INT
PROG
Selecting first handset
One handset will ring first, then all other
handsets will ring if the first handset is not
answered. You can choose which handset will
ring first and the ring count (1 to 6) until all
handsets ring. The factory preset is 3 rings.
7
Press a dialling button to to
select the ring count.
8 Press .
A confirmation tone sounds and the
display will return to the stand-by mode.
PROG
6
1
1 Press then .
2 Press .
3 Enter the base unit password (p. 27).
The current setting is displayed.
1: All handsets
2: Specified handset(s)
3: First handset
4 Press .
The current registered handset number(s)
is/are displayed.
5 Enter the handset number you want to
ring.
The selected handset number flashes.
If you misdial, press the number again.
6 Press .
The handset number is stored.
The current ring count is displayed.
PROG
3
1
INT
PROG
Ex. Handset 4 is selected.
iu3 - i23456
Ex. Ring count 3 is selected.
i03 - i23456 -3
Even if you select “Specified handset(s)” or
“First handset”, calls can also be received on
the handsets which do not ring.
KX-TCD952EB(034~039) 00.3.30 1:39 PM Page 39