Filter
Top Products
Useful Information
For assistance, please visit http://www.panasonic.com/consumersupport 51
Battery recharge
Power failure
Problem Cause & solution
“Recharge battery” is
displayed, 7 flashes
or the handset beeps
intermittently.
LFully charge the battery (page 15).
“Charge for 6h” and
8 are displayed and
the handset does not
work.
LThe battery has been discharged. Fully charge the
battery (page 15).
I charged the battery fully,
but “Recharge
battery” is still
displayed and/or 7
continues to flash, or
“Charge for 6h” and
8 are displayed.
LClean the charge contacts and charge again (page 14).
LThe battery may need to be replaced (page 16). If you
install a new battery, fully charge it (page 14).
The CHARGE indicator
does not go out after the
battery has been
charged.
LThis is normal.
The handset display is
blank.
LConfirm that the battery is properly installed.
LFully charge the battery (page 14).
Problem Cause & solution
The unit will not function. LThis product is not designed to make calls in the event
of a power failure. We recommend connecting a
standard telephone to the same telephone line in the
event that emergency calls need to be made during a
power failure (page 9).
TG2480(e).book Page 51 Monday, August 7, 2006 10:32 AM