Filter
Top Products
Programmable Settings
42 For assistance, please visit http://www.panasonic.com/consumersupport
Programming via direct commands
You can also program most features using “direct commands”—special codes that take
you directly to the feature you wish to program and allow you to select the desired setting.
There is no need to scroll through the unit’s menus.
Details of each feature can be found on the corresponding pages.
1 Press {MENU}.
2 Enter the desired feature code (shown below).
3 Enter the desired setting code (shown below).
LThis step may vary depending on the feature being programmed.
4 Press {Save}.
5 Press {OFF} to exit programming mode.
Direct commands chart
Feature Feature code Setting code Page
Ringer volume Line 1 {1} {1} {1}{1}: Low {2}: Medium
{3}: High {0}: Off
page 36
Line 2 {1} {1} {2}
Ringer tone Line 1 {1} {2} {1}{1}–{4}: Tone pattern 1–4
{5}–{8}: Melody pattern 1–4
page 36
Line 2 {1} {2} {2}
Interrupt tone {1} {3}{1}: On {2}: 2 times {0}: Off page 37
VM access Line 1 {3} {1} Go to step 2 on page 34. page 34
Line 2 {3} {2}
Voice enhancer {5}{1}: On {0}: Off page 38
LCD contrast {0} {1}{1}–{6}: Level 1–6 page 38
Key tone {0} {2}{1}: On {0}: Off page 40
Auto talk {0} {3}{1}: On {0}: Off page 37
Caller ID number auto
edit
{0} {4}{1}: On {0}: Off page 38
Set dial mode {0} {5} {1}{1}: Pulse {2}: Tone page 19
Set flash time Line 1 {0} {5} {2} {1}{1}: 700 ms {2}: 600 ms
{3}: 400 ms {4}: 300 ms
{5}: 250 ms {6}: 110 ms
{7}: 100 ms {8}: 90 ms
page 39
Line 2 {0} {5} {2} {2}
Set line mode Line 1 {0} {5} {3} {1}{1}: A {2}: B page 39
Line 2 {0} {5} {3} {2}
Line selection {0} {5} {5}{0}: Auto {1}: Line 1 {2}: Line 2 page 40
TG2480(e).book Page 42 Monday, August 7, 2006 10:32 AM