Filter
Top Products
Making/Answering Calls
22 For assistance, please visit http://www.panasonic.com/consumersupport
Using the other line
during a conversation
When you are on a call and another call is
received on the other line, you will hear 2
tones (page 37), and the line indicator on
the base unit will flash rapidly.
You can answer the 2nd call while holding
the 1st call. You can also make another
call without finishing the 1st call.
LIf you subscribe to Caller ID service, the
2nd caller’s information will be displayed
when a call is being received on the
other line (page 29).
To hang up the 2nd call and return to
the 1st call
Example: If you are using LINE 1
1 Press {HOLD} to put the 1st call (LINE
1) on hold (page 23).
Lk will flash.
2 Press {Line2} to make or answer a 2nd
call.
3 Press {OFF}, then press {Line1}.
LThe 2nd call will be terminated.
To hold the 2nd call and return to the
1st call
Example: If you are using LINE 1
1 Press {HOLD} to put the 1st call (LINE
1) on hold (page 23).
Lk will flash.
2 Press {Line2} to make or answer a 2nd
call.
3 Press {HOLD}, then press {Line} and
{Line1} to return to the 1st call.
Ll will flash.
Conference calls
While you are talking with an outside caller,
you can make or answer a 2nd call on the
other line, and then combine the calls to
establish a conference call.
Example: If you are using LINE 1
1 Press {HOLD} to put the 1st call (LINE
1) on hold (page 23).
Lk will flash.
2 Press {Line2} to make or answer a 2nd
call.
3 When the 2nd call is connected, press
{Conf} to make a conference call.
LTo hang up both lines, press {OFF}.
LTo hang up only 1 line, press {Line}
and select the party you want to
continue talking with by pressing
{Line1} or {Line2}.
LTo put both lines on hold, press
{HOLD}.
To talk with only 1 caller, select the
party you want to continue talking
with by pressing {Line}, then {Line1}
or {Line2}. To let the other party join
the conversation again, press
{Conf}.
TG2480(e).book Page 22 Monday, August 7, 2006 10:32 AM