Filter
Top Products
Useful Information
44 For assistance, please visit http://www.panasonic.com/consumersupport
Wall mounting
The base unit can be mounted on a wall
phone plate.
1 Push the hook and turn it upward until it
clicks into place.
2 Press the tabs in the direction of the
arrows (1), then remove the wall
mounting adaptor (2).
3 Connect the AC adaptor. Tuck the
telephone line cord inside the wall
mounting adaptor, then push the
adaptor in the direction of the arrows
(1 and 2).
LThe word “UP WALL” should face
upward.
LFasten the AC adaptor cord to
prevent it from being disconnected.
4 Connect the telephone line cord. Mount
the unit, then slide it down.
LRaise the antenna.
2
1
1
Hook
To Power
Outlet
1
2
Hook
TG2480(e).book Page 44 Monday, August 7, 2006 10:32 AM