Filter
Top Products
Programmable Settings
For assistance, please visit http://www.panasonic.com/consumersupport 37
– another person answers the call using
another phone connected on the
same line.
LIf LINE 1 and LINE 2 have different
ringer patterns and both lines receive
calls simultaneously, both ringers will
ring alternately.
Handset interrupt tone
This tone lets you know when a call is
being received on the other line during a
conversation.
“2” (default): The tone will sound 2 times.
“On”: The tone will sound for as long as the
line rings.
“Off”: Turns this feature off.
1 Press {MENU}.
2 Scroll to “Ringer setting” by
pressing {V} or {^}, then press
{Select}.
3 Scroll to “Interrupt tone” by
pressing {V} or {^}, then press
{Select}.
4 Press {V} or {^} repeatedly to select
the desired setting.
5 Press {Save}, then press {OFF}.
Call options
Auto talk
When this feature is turned on, you can
answer a call by lifting the handset off the
base unit without pressing {C}. The
default setting is OFF.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press
{Select}.
3 Scroll to “Auto talk” by pressing {V}
or {^}, then press {Select}.
4 Press {V} or {^} repeatedly to select
“On” or “Off”.
5 Press {Save}, then press {OFF}.
Note:
LIf you subscribe to Caller ID service and
want to view the caller’s information on
the handset display after lifting up the
handset to answer a call, turn off this
feature.
LIf you set the line selection mode from
“Auto” to “Line1” or “Line2” (page 40),
the auto talk feature will function for that
line only. If the other line receives a call,
the auto talk feature will not function.
TG2480(e).book Page 37 Monday, August 7, 2006 10:32 AM