Filter
Top Products
Preparation
14 For assistance, please visit http://www.panasonic.com/consumersupport
Battery installation
1 Insert the battery (1), and press it
down until it snaps into the
compartment (2).
2 Close the handset cover.
Battery charge
Place the handset on the base unit for 6
hours before initial use.
LThe unit will beep once, the CHARGE
indicator will light, and “Charging” will
be displayed.
L“Charge completed” is displayed
when the battery has been fully charged.
The CHARGE indicator will remain lit.
Note:
LTo ensure the battery charges properly,
clean the charge contacts of the handset
and base unit with a soft, dry cloth once
a month. Clean more often if the unit is
subject to grease, dust, or high humidity.
1
2
CHARGE indicator
OR
TG2480(e).book Page 14 Monday, August 7, 2006 10:32 AM