Programmable Settings
For assistance, please visit http://www.panasonic.com/consumersupport 35
Guide to handset programming
For your reference, a chart of all programmable functions is printed below. Details for each
item can be found on the corresponding pages. To program, press {MENU}, press {V} or
{^} to scroll through the menu, and press {Select} when the desired menu item or setting
is displayed.
Important:
LBefore programming, make sure the handset is not being used. The handset must be
operated near the base unit and while off the base unit.
Note:
LTo exit programming, press {OFF} at any time.
LTo go back to the previous menu, press {Back}, or press {Select} while “(Go back)”
is displayed.
Main menu Sub-menu 1 Sub-menu 2 Page
V.M. access – – page 34
Ringer setting Ringer volume – page 36
Ringer tone – page 36
Interrupt tone – page 37
Voice enhancer – – page 38
Customer support – – page 41
Initial setting Voice Mail Store VM access# page 33
VM tone detect page 33
Message alert – page 34
LCD contrast – page 38
Key tone – page 40
Auto talk – page 37
Caller ID edit – page 38
Set tel line Line selection page 40
Set dial mode page 19
Set flash time page 39
Set line mode page 39
Registration – page 40
Change language – page 38
TG2480(e).book Page 35 Monday, August 7, 2006 10:32 AM