Filter
Top Products
-Operation-
6.8 Deleting the entire caller list
1. Press d or c button to display the caller list.
2. Press and hold
CLEAR button for 5 seconds. Display shows “DEL ALL
CALLS?”
3. Press
CLEAR button again to confirm.
6.9 Dialling a telephone number directly from the Caller
List
You can dial telephone numbers directly from the caller list.
1. Press
d and c button to select the required call number on the display.
2. Now press
DIAL/MENU button, the display show area code filtered number.
If you want to select the number format with area code and long distance
code, press the
DIAL/MENU button again. After the selected number is
show on the display, the number will be dialled automatically after 2 seconds.
The handsfree LED indicator will illuminate.
Note! If your selected country option be New Zealand, the phone will
automatically recognise whether the number is long distance. If the number is a
long distance number it will add the long distance code “0” in font of the
telephone number and will show on the display.
6.10 Saving a number from the Caller List to the
telephone memory
A telephone number stored in the caller list can be saved directly to the telephone
memory.
1. Press
d and c button to select the required call number on the display.
2. Press
STORE button. Display shows “ENTER LOCATION”
3. Enter memory location that the number to be stored. The location can be
A1, A2, A10 or MEMORY 0 to 9.
6.11 Message Waiting Indication
Message Waiting is an optional service from your telephone service provider. If
this service is not available, the MSG indicator will not operate. Please ask your
telephone service provider for further information. When the message waiting
signal is received the
icon as well as the MESSAGE indicator light are turned
on.
Usually, the message waiting status will be cleared when you retrieve your
messages. If this does not happen you can clear the MESSAGE indicator
manually. Simply press and hold
CLEAR button for 2 seconds. The MESSAGE
indicator will turn off.