Oricom TP29 Telephone User Manual


 
-Operation-
3.14 Last Number Redial
If a connection that you have dialled is engaged or you were unable to get
through, simply replace the receiver. The last number dialled will be saved in
the telephone automatically. To use the redial facility, proceed as follows:
1. Lift the receiver or press the handsfree button
.
2. Press the
REDIAL/PAUSE button the saved redial number will now be
dialled
3.15 Auto Redial
If a connection that you have dialled is engaged or you were unable to get
through to anybody, simple press the
DIAL/MENU button when you are on
the handsfree or headset mode. The last number dialled will be saved in the
telephone automatically. To use the auto redial facility, proceed as follows:
1. Press the handsfree button
.
2. Dial the required telephone number or press the
DIAL/MENU button to
dial the saved last number.
3. If the number cannot get through, press the
DIAL/MENU button. The
phone will automatically try the number continuously until the call is get
through or the number is tried ten times.
4. When the call is getting through, the phone will play several beep sound.
After the beep sound, you can talk on the phone.
4 Operation
4.1 Making a call using the receiver, handsfree and
headset feature
A: Making a call using the receiver
1. Lift the receiver and wait until you hear a dialling tone.
2. Now dial the required telephone number. The display shows the number
dialled. If the number dialled is longer than 32 digits, only the last 32 digits
will be saved in the redial memory.
3. If the receiver volume is too quiet or too loud, you can change this to suit
your requirements. Adjusted the volume with the
+ and - buttons.
4. To end the call, replace the receiver.