Filter
Top Products
only
2
3
If auto-answer is on and the handset is in the base:
Lift the handset to answer the call. You do not need to
press .
Headset connection port
The headset has a connection port suitable for 2.5mm
stereo jack, on the right-hand side with which to connect a
headset (headset not supplied). There is no guarantee the
headset will function properly.
Redial a number
Press , then . Or
Press , then press or to scroll to any of
the last 20 dialled numbers and press to dial.
Mute ON/OFF
Mute your voice so the caller cannot hear you. During a call:
Press to switch mute ON/OFF. MUTE will be shown
on the display.
Call waiting
(Australia only)
To use Call Waiting you must subscribe to the relevant
service from your network provider.
During a call, you will hear two loud beeps periodically to notify
you of another incoming call. If you wish to answer this call:
1 When the handset receives a second call, the number of
the caller appears on the display. It will display for 60
seconds or until you press a key on the phone. Press
listen for dial tone then Press to put the current
call on hold and talk with the second caller.
2 To toggle between calls press listen to dial tone then
press .
Caller information of this second call will be stored in the call log.
If you have subscribed to your telephone network operators
Call Waiting Caller ID service (Australia only), your phone
will display the number of the second incoming call for
around 60 seconds while you are talking on the phone.
(New Zealand only)
1 To put your current call on hold and talk to the second
caller press the key.
2 To toggle between calls press the key.
Page a handset
Press on the base. Handset(s) will ring.
To stop the paging ring, press again or press any
key on the handset.
Phonebook
Store up to 60 phonebook entries. Names up to 16
characters, numbers up to 24 digits.
Store a phonebook entry
1 Press then twice.
2 Enter a name using the keypad and press .
3 Enter a number using the keypad and press to
confirm.
To enter characters, press the key showing the required
letter repeatedly until the letter you want is displayed. Wait
for the cursor to move to the right if the next letter is on the
same key and press the key to confirm.
Press repeatedly to display * # ? ! $ & % / \ | ~
Press repeatedly to display 0 ‘ “ [ ] < > { }
Press to delete characters/digits.
Press to switch from lower to upper case, will be
shown if a smaller letter is entered.
Press repeatedly to display SPACE 1 _ - + = . , ; :
To enter a pause in a number, press .
Dial a phonebook entry
1 Press .
2 Scroll or to display the entry you want. Or,
search alphabetically, by pressing the alphanumeric button
showing the first letter of the name you want the relevant
number of times.
3 Press to dial.
Edit a phonebook entry
1 Press .
2 Scroll or to display the entry you want. Or,
search alphabetically.
3 Press , then or , or press to display
EDIT RECORD and press .
4 Edit the name using the keypad and press to
confirm.
5 Edit the number using the keypad and press to
confirm.
Press to delete incorrect characters/digits.
Delete a phonebook entry
1 Press .
2 Scroll or to display the entry you want. Or,
search alphabetically.
>