Filter
Top Products
me
1
Outgoing message (OGM) 12
Record your own ‘Answer and
Record’ outgoing message 12
Play/check your OGM 13
Delete your OGM 13
Answering machine menu options 13
Announce Only 13
Ring delay 14
Time Saver Mode 14
REMOTE ACCESS 15
Security PIN code 15
Change the security PIN code 15
Phone in to hear your messages 15
Remote operation command table 16
NETWORK SERVICES 17
Caller ID 17
Call log 17
View/dial/edit from the call log 17
Store a number to the
phonebook 17
Delete an entry/all entries 18
Voice Message/Message Waiting 18
How to clear the icon manually 18
MULTI-HANDSET USE 19
Register a new handset 19
Select a base to use 19
De-register a handset 19
Make internal call 20
Transfer an external call 20
3-Way conference call 20
SIMPLE SOLUTIONS 21
Troubleshooting 21
Electrostatic Discharge 22
GENERAL INFORMATION 23
Safety 23
Batteries 23
Cleaning your Oricom Touch Phone 24
NOTES FOR OPERATION IN
NEW ZEALAND 25
REN (RN for New Zealand) 25
Caller ID 25
WARRANTY 26
Customer support 27
Touch Activated Keypad
Unlike other phones your Touch phone has a ‘touch
activated keypad’. The touch activated keypad will
automatically disable when you hold the handset receiver
to your ear. The idea being, to reduce the risk of accidental
keypad presses while the phone is held against the
side of your face. Likewise, the keypad also disables
automatically 5 seconds after the last key is pressed. To
‘wake’ the keypad enabling you to dial further digits, e.g. if
you are using telephone banking or want to access the
menu, just touch any of the numbers to reactivate the
keypad. When the keypad illuminates dial normally. It
is very easy to tell when the keypad is disabled, as
the keypad backlight will not be on. Additionally if you
want to manually disable the keypad when carrying
the handset to prevent accidental key operations, just
press followed by the key. The manual keylock
feature cannot be activated during a call. A key icon will
appear in the top left of the display to show the keys are
locked, pressing followed by the will unlock the
keys again for use.
To return to standby mode at any time, press
Make a call
Press , wait for the dial tone and dial the number.
Preparatory dialling
Enter the number first, then press to dial or to
cancel.
Press to delete digits.
Switch to handsfree/speakerphone during a call
Press . SPKR will be displayed. Press again to go
back to the handset.
Adjust the call volume
During a call, press or to increase/decrease
the volume.
End a call
Press or place the handset on the base/charger.
Receive a call
When the phone rings, lift the handset from the
base/charger and press .
USING YOUR PHONE