Filter
Top Products
33
Press
OK/CLK
buttontoconrm.Aconrmationtone
will be emitted and the base will return to standby
mode.
Edit a Phonebook entry
Press
Phonebook
button in standby mode and
select an entry by pressing
CID up/down
button
Press and hold
Phonebook
button again till the
Phonebook icon is displayed on the LCD.
Press
Mute/C/Delete
button to erase the original
number
Key in the number and then press
OK/CLK
button to
conrm.
Aconrmationtonewillbeemittedandthebasewill
return to standby mode.
Delete a Phonebook entry
Press
Phonebook
button in standby mode and
select an entry by pressing
CID up/down button
Press
Mute/C/Delete
button and the LCD will be
displayed:
Press
OK/CLK
buttontoconrm.Aconrmationtone
will be emitted and the base will return to standby
mode.
Delete all Phonebook entries
Press
Phonebook
button in standby mode
Long press and hold
Mute/C/Delete
button and the
LCD will be displayed:
Press
OK/CLK
buttontoconrm.Aconrmationtone
will be emitted and the base will return to standby
mode.
Caller ID on the corded base
This is a call log that shows the phone numbers of the
incoming calls. There are 20 records can be stored on
the base with maximum 24 digits for each record.
Each CID record will be displayed with the
corresponding time, date and phone number (but CID
name won't be displayed.)
View CID record
Press
CID up/down
button to browse through the
call log in standby mode
The call log icon will be displayed on LCD, and the
corresponding record number will also be displayed
at the top right corner (such as #01).
Add a CID record into Phonebook
Press
CID up/down
button in standby mode to select
an entry
Press and hold
Phonebook
button till the Phonebook
icon is displayed on the LCD
Press
Mute/C/Delete
button to erase the digits if you
want to edit the number, then press
OK/CLK
button
toconrm.
HANdSET TONE
HANdSET TONE
CORdEd BASE OpERATIONS
CORdEd BASE OpERATIONS