Filter
Top Products
15
Cordless Handset Operations
Switching ON/ OFF
Press and hold the
END
button for more than 2
seconds to switch on/off the handset in standby mode.
You can switch the handset off to save battery charge.
Note:
The handset cannot be used for Emergency
calls when switched off. Also, it won’t ring during
an incoming call. You need to switch it back on
to answer a call, which might take some time for
the handset to re-establish a radio link with the
base unit.
Make a call
You can input with maximum 24 digits.
Pre-dialing
- Dial the number and then press
TALK
button.
Note:
You can press
BACK
button to erase the digits
if you made an error.
Direct dialing
- Press
TALK
buttonrstandthendial
the number
Note:
You won’t be able to erase and correct the entered
digits in direct dialing mode.
You can also call from Call log/Redial
list/Phonebook
Call from call log
Press
Navigation Up
button in standby mode and
select the desired entry by using
Up/down
button
Press
TALK
button to make a call
Note:
You needsubscribetoCallerLineidentication
service to view the caller’s number or name in
the call log.
Call from Redial list
Press
Redial
button in standby mode and select the
desired entry by using
up/down
button
Press
TALK
button to make a call
Call from Phonebook
Press Phonebook button in standby mode and select
the desired entry by using
up/down
button
Press
TALK
button to make a call
Answer and End a call
Answer
– Press
TALK
button to answer a call when
the phone rings
End
– Press END button to end a conversation
COREdE BASE LCd LAYOUT
CORdLESS HANdSET OpERATIONS