Filter
Top Products
27
AdvANCEd USE OF YOUR TELEpHONE
USING THE INTERCOM/
MAkE CONFERENCE CALL
Using the intercom/Make
conference call
Initiate an intercom call
1. Press
INT
button (or the
INT/PAGE
button on the
base unit) in standby mode
2. Handset will display
INT
with the relevant handset
numbers that are available for intercom.
3. Press the specific handset number you want to
call, or press * to call handsets
Note:
if there is only one cordless handset registered
on the corded base, press
INT
button on the
handset will automatically call the corded base.
"
0
" is presented for the corded base when there
are more than one registered cordless handsets.
Answer an incoming call during intercom
When there is an incoming call during intercom,
you will hear the alert tone and
CALLING
will be
displayed on handset screen.
Press
TALK
button to answer the incoming call and
the intercom will be ended
Or you can put the intercom on hold by pressing
INT button, then press
TALK
button to answer the
incoming call
Press
END
button to end the conversation with
external call and the handset will return to the
previous intercom
Transfer an external call to another handset
1. Press
INT
button to put the external call on hold
(the caller won’t be able to hear you)
2. Handset will display
INT
with the relevant handset
numbers that are available for intercom.
3. Press the specific handset number you want to
call, or press * to call handsets
4. Press
TALK
button on the handset(s) that being
called to accept the internal call, then press
END
button on the originating handset to transfer the
external call
Note:
If there is no answer from the internal
handset(s), you can press
INT
button to resume
the external call.
Establish a three-party conference call
1. Press
INT
button to put the external call on hold
(the caller won’t be able to hear you)
2. Handset will display
INT
with the relevant handset
numbers that are available for intercom, press the
specichandsetnumberyouwanttocall
3. Press
TALK
button on the handset that being
called to accept the internal call, then press and
hold the
INT
button on the originating handset
for about 2 seconds to establish the three-party
conference.
CONFERENCE
will be displayed on
the handset screen.