Filter
Top Products
30
ANSWERING SYSTEM
If the answering system is turned off, you must
change your master
PIN
from its default 0000, before
you can use the remote access feature.
1. Press
MENU
button in standby mode
2. Press
Up/Down
button to select
ANSW MACHINE
and press
OK
buttontoconrm
3. Press
Up/Down
button to select
SETTINGS
and
press
OK
buttontoconrm.
4. Press
Up/Down
button to select
REMOTE ACC
.
and press
OK
buttontoconrm.
5. Press
Up/Down
button to select
ACTIVATE
or
DEACTIVATE
and press
OK
buttontoconrm.
Access the answering system remotely
Dial your home number from another phone, when
the answering system answers your call and starts to
play the
OGM
, press # key on the phone and enter the
remote access code (which is same as your PIN code)
The remote feature lets you perform the following
functions by pressing the corresponding
numeric key:
• Review message 1
• Play back messages 2
• Stop message playback 8
• Erase message 6 (during message playback)
• Skip message 3
• Turn on answerer machine 7
• Turn off answerer machine 9
Note:
If the answering system is off, and the master
PIN
has been changed from its default 0000, it
will answer the call after 10 rings.