Filter
Top Products
Installing the DFC on systems equipped with a BIC 23
P0886634 Issue 1.0 FAX Installation Guide
Figure 17 Re-installing the BIC in a new NAM
5. Push the BIC straight back until it fits snugly in place. Ensure the edge
connector is firmly inserted into the socket.
6. If you have a NAM II, reconnect the Serial Port A and Serial Port B
connectors to the SBC. Reconnect the keyboard/mouse connector to the SBC.
For the location of the connectors, refer to Figure 13
on page 19.
Note: Ensure the keyboard/mouse ribbon cable is still connected to the
backplane.
7. Fasten the slot cover screw in the BIC slot cover.
8. Replace the front cover.
Slot 4
BIC