Filter
Top Products
P0886634 Issue 1.0 FAX Installation Guide
Installing the DFC on systems equipped with
DVCs
Only one DFC can be installed in the Norstar Applications Module (NAM). The
DFC connects to the DVCs through the PCM Expansion Bus (PEB) cable. This
cable must be connected from the DFC to each DVC. The PEB cable connects the
DFC to the DVC to share the ports connected to Norstar.
The following section provides step-by-step instructions for the installation of the
FAX software, a DFC and the PEB cable in a Norstar Voice Mail system equipped
with Digital Voice Cards (DVC)s. For information on installing a DFC in a
Norstar Voice Mail system equipped with a Media Services Base Interface Card
(BIC), refer to "
Installing the DFC on systems equipped with a BIC" on page 17.
Figure 2 Digital Fax Card and PEB cable
2
PEB Connector
PEB Terminator
Interrupt SW2 SW1