Filter
Top Products
DECT system configuration
46
You can now use the handset to dial and receive calls.
Manually selecting the DECT system
If you subscribe the handset to more than one DECT system, you can
manually select which system the handset uses.
To manually subscribe to a DECT system, perform the following steps.:
Enabling automatic DECT system selection
If you subscribe the handset to several DECT systems and you configure
the automatic search function, the handset automatically selects the
nearest system. As a result, your handset automatically logs on to
another subscribed DECT system when you leave the effective range of
the current system. If this function is active, the handset will attach to an
10. Press the Clr key one or more times to return to the
idle display.
1. Open the Connectivity menu as shown in
“Accessing the Connectivity menu” (page 43).
2. Press the Up or Down key to highlight the Network
select option.
3. Press the Select soft key.
4. Choose the name of the system from the list, and
then press the Select soft key.
The name of the currently active system is
highlighted.
5. Press the Clr key one or more times to return to the
idle display.
Network select
Select
Select