Filter
Top Products
Handset accessories
200
Connecting and disconnecting a paired Bluetooth headset
When you add a Bluetooth headset, the DECT Handset connects
automatically if active. The DECT Handset disconnects the Bluetooth
headset if the handset is inactive or out-of-range.
To connect and disconnect a Bluetooth handset manually, perform the
following steps:
4. Press the Up or Down key to highlight the Search
for devices option.
Attention: If the search process is successful,
perform steps 5 to 9. If the search is unsuccessful,
repeat steps 3 to 4.
5. Press the Pair soft key and add the headset.
6. Use the Dialpad to enter the PIN code of your
Bluetooth headset (refer to the headset
documentation).
7. Press the Connect soft key to connect the device.
8. Press the Clr key one or more times to return to the
idle display.
1. Open the Bluetooth configuration menu as shown
in “Accessing the Bluetooth configuration menu”
(page 198).
2. Press the Up or Down key to highlight the Paired
devices option and press the Select soft key.
Search for devices
Pair
Connect
R
Bluetooth
Paired devices
Select