Filter
Top Products
Telephone settings
174
Editing entries in the Caller filter list
To edit entries in the Caller filter list, perform the following steps:
4. Press the Up or Down key to highlight the Enter
number option, press the Select soft key and use
the Dialpad to enter the telephone number and the
name, and then press the Save soft key.
OR
Press the Up or Down key to highlight the Lookup
contact option, press the Select soft key and use
the Up or Down key to highlight the required
contact, and then press the Select soft key.
Attention: Numbers can consist of a maximum of
32 characters. Names can consist of a maximum of
16 characters.
You can use one asterisk at the end of a number to
filter all numbers that begin with the specified
sequence.
5. Press the Clr key one or more times to return to the
idle display.
1. Open the Caller filter menu as shown in
“Accessing the Caller filter menu” (page 173).
2. Press the Up or Down key to highlight the List
option and press the Select soft key.
3. Press the Up or Down key to highlight the required
entry and press the More soft key.
Caller filter
List
Select
More