Filter
Top Products
DECT system configuration
45
2. Press the Up or Down key to highlight the Register
option.
3. Press the Select soft key to start the registration
process.
4. Press the Up or Down key to choose Empty if
there are less than four subscriptions to the system
on the handset, or choose the name of the system
you would like to overwrite.
5. Press the Select soft key, and then press the Yes
soft key if you want to overwrite a system.
6. Use the Dialpad to enter the PARK code at the
PARK prompt, and then press the Save soft key.
Attention: Use a PARK code system ID if more
than one DECT system overlaps in your location. If
only one DECT system is available, make no entry,
and press the Skip soft key.
7. Use the Dialpad to enter the PIN (authorisation
code) at the PIN prompt, and then press the OK
soft key.
8. Use the Dialpad to enter the system name at the
Network name prompt, and then press the Save
soft key.
9. Use the Dialpad to enter the phone number
assigned to your handset at the Number prompt,
and then press the Save soft key.
Register
Select
Empty
Select
Yes
Save
OK
Save
Save