Filter
Top Products
Telephone settings
170
Answer mode configuration
The following Answer modes define the way you answer incoming calls:
• Any key answer mode—answer with any key
• Autoanswer mode—the handset goes off-hook automatically
• Normal answer mode—answer with the OK or Call key
This section describes the following tasks:
• “Configuring Any key answer mode” (page 170)
• “Configuring Autoanswer mode” (page 171)
• “Configuring Normal answer mode” (page 172)
Configuring Any key answer mode
To configure Any key answer mode, perform the following steps:
3. Press the Up or Down key to highlight the Call
time option or the Message count option.
Attention: The message count option is available
only on the DECT 4070 Handset.
The Call time and Message count options reflect
the statistics only for outgoing calls and messages.
4. Press the Reset soft key to reset the statistics (if
necessary) and then press the Yes soft key to
confirm the changes.
5. Press the Clr key one or more times to return to the
idle display.
1. Open the Calls menu as shown in “Accessing the
Calls settings menu” (page 169).
Call time
Message count
Reset
Yes