Filter
Top Products
Settings
56
Call forwarding — to forward your incoming calls (network service). Call forwarding
and call restrictions cannot be active at the same time. See Call restrictions in
“Security,” p. 58.
Anykey answer > On — to answer an incoming call by briefly pressing any key,
except the left and right selection keys, volume key, camera key, or the end key.
Answer when fold is opened > On — to set your phone to answer a call when you
open the fold. If the setting is off, you must press the call key after you open the fold.
Automatic redial > On — to set your phone to make a maximum of 10 attempts to
connect the call after an unsuccessful call attempt.
1-touch dialing > On — to dial the names and phone numbers assigned to the
1-touch dialing keys, 2 to 9. To dial, press and hold the corresponding number key.
Call waiting > Activate — to set the network to notify you of an incoming call
while you have a call in progress (network service). See “Call waiting,” p. 22.
Summary after call > On — to briefly display the approximate duration of the call
after each call.
Send my caller ID > Yes — to show your phone number to the person you are calling
(network service). To use the setting agreed upon with your service provider, select
Set by network.
■ Phone
Select Menu > Settings > Phone and one of the following options:
Language settings > Phone language — to set the display language of your
phone. If you select Automatic, the phone selects the language according to the
information on the SIM card.
• To select the USIM card language, select SIM language.
• To set a language for the voice playback, select Voice recognition language. See
“Make a voice dialing call,” p. 21 and Voice commands in “My shortcuts,” p. 46.
Memory status — to view the free memory and the used memory for each
function in the list.
Automatic keyguard — to set the keys to lock automatically. Choose On and the
time-out to activate the keyguard or Off to set the automatic keyguard off.
Security keyguard — to set the phone to ask for the security code when you unlock
the keyguard. Enter the security code, and select On. When the keyguard is on,
calls still may be possible to the official emergency number programmed into
your device.