NEC IP3AT-8WV(AUSTRALIA) IP Phone User Manual


 
50
• TIME FORMAT
Factory Default: 12hour
You can select a time format (12hours, 12hours
(AM0:00) and 24hours) as required.
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press the key.
- Press the key to select “1.User Setting”
and then press the key.
- Press the key to select “7.Date & Time”
and then press the key.
- Press the key to select “3.Time Format”
and then press the key.
- Press the key to select “1.12hours”,
“2.12hours(AM0:00)” or “3.24hours” and
then press the “OK” soft key.
You can reach the Time Format
menu by pressing the following
keys.
To go to the Time Format menu:
• DAYLIGHT SAVING
Factory Default: Disable
You can use daylight saving as required.
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press the key.
- Press the key to select “1.User Setting”
and then press the key.
- Press the key to select “7.Date & Time”
and then press the key.
- Press the key to select “4.Daylight
Saving” and then press the key.
- Press the key to select “1.Disable” or
“2.Enable” and then press the “OK” soft
key.
You should not set daylight saving
to enable when your phone
displays I-SIP icon.
You can reach the Daylight Saving
menu by pressing the following
keys.
To go to the Daylight Saving
menu:
TIP
Time Format
OK Back
1.12hours
2.12hours(AM0:00)
3.24hours
TIP
Daylight Sav
OK Back
1.Disable
2.Enable
TIP