Filter
Top Products
43
• CALL VOLUME
Factory Default: Middle
You can adjust receiver volume.
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press the key.
- Press the key to select “1.User Setting”
and then press the key.
- Press the key to select “2.Talk” and
then press the key.
- Press the key to select “3.Call Volume”
and then press the key.
- Call Volume can be set in 3 levels (Small,
Middle and Large).
- Press the key to select an appropriate
volume and then press the “OK” soft key.
You can reach the Call Volume
menu by pressing the following
keys.
To go to the Call Volume menu:
• HANDOVER TONE
Factory Default: Disable
Your phone can provide a warning tone when
handover takes place.
Handover is the process of
transferring a wireless phone user
from one Access Point to another.
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press the key.
- Press the key to select “1.User Setting”
and then press the key.
- Press the key to select “2.Talk” and
then press the key.
- Press the key to select “4.Handover
Tone” and then press the key.
- Press the key to select “1.Disable” or
“2.Enable” and then press the “OK” soft
key.
You can reach the Handover Tone
menu by pressing the following
keys.
To go to the Handover Tone menu:
Call Volume
Large
OK Back
TIP
TIP
HandoverTone
1.Disable
2.Enable
OK Back
TIP