NEC IP3AT-8WV(AUSTRALIA) IP Phone User Manual


 
48
• KEY TOUCH TONE
Factory Default: Disable
You can unmute or mute a tone that is provided
when you press any key on your phone.
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press the key.
- Press the key to select “1.User Setting”
and then press the key.
- Press the key to select “6.Keypad
Mode” and then press the key.
- Press the key to select “1.Key Touch
Tone” and then press the key.
- Press the key to select “1.Disable” or
“2.Enable” and then press the “OK” soft
key.
You can reach the Key Touch Tone
menu by pressing the following
keys.
To go to the Key Touch Tone
menu:
• SPEAKER MONITOR
Factory Default: Disable
You can use the Speaker monitor while talking
as required. When entering Speaker monitor
mode, you can hear the called party’s voice from
the speaker of your phone.
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press the key.
- Press the key to select “1.User Setting”
and then press the key.
- Press the key to select “6.Keypad
Mode” and then press the key.
- Press the key to select “5.Speaker
monitor” and then press the key.
- Press the key to select “1.Disable” or
“2.Enable” and then press the “OK” soft
key.
You can reach the Speaker
monitor menu by pressing the
following keys.
To go to the Speaker monitor
menu:
TIP
KeyTouchTone
1.Disable
2.Enable
OK Back
TIP
Spk monitor
1.Disable
2.Enable
OK Back