NEC IP3AT-8WV(AUSTRALIA) IP Phone User Manual


 
42
• RTP ALARM
Factory Default: Disable
Your phone can provide an alarm if RTP packet
loss is suspected.
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press the key.
- Press the key to select “1.User Setting”
and then press the key.
- Press the key to select “2.Talk” and
then press the key.
- Press the key to select “1.RTP Alarm”
and then press the key.
- Press the key to select “1.Disable” or
“2.Enable” and then press the “OK” soft
key.
You can reach the RTP Alarm
menu by pressing the following
keys.
To go to the RTP Alarm menu:
• HOLD MUSIC
Factory Default: Tone Type12
You can select the music that is provided while
your phone is in hold status.
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press the key.
- Press the key to select “1.User Setting”
and then press the key.
- Press the key to select “2.Talk” and
then press the key.
- Press the key to select “2.Hold Music”
and then press the key.
- Press the key to select a music you
want and then press the “OK” soft key.
By pressing the “Play” or “Stop”
soft key, you can hear the Music
while you select Music.
You can reach the Hold Music
menu by pressing the following
keys.
To go to the Hold Music menu:
TIP
RTP Alarm
1.Disable
2.Enable
OK Back
TIP
TIP
Hold Music
Play OK Back
09.Tone Type9
10.Tone Type10
11.Tone Type11
12.Tone Type12