NEC IP3AT-8WV(AUSTRALIA) IP Phone User Manual


 
45
• BACK LIGHT
Factory Default: 5sec
You can adjust a timer until the LCD back light
is off.
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press the key.
- Press the key to select “1.User Setting”
and then press the key.
- Press the key to select “3.Display” and
then press the key.
- Press the key to select “2.Back Light”
and then press the key.
- Back Light can be set 5 to 30 seconds.
- Edit an appropriate timer value and then
press the “OK” soft key.
You can reach the Back Light
menu by pressing the following
keys.
To go to the Back Light menu:
• FONT SIZE
Factory Default: Standard
You can select a font size.
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press the key.
- Press the key to select “1.User Setting”
and then press the key.
- Press the key to select “3.Display” and
then press the key.
- Press the key to select “3.Font Size”
and then press the key.
- Press the key to select “1.Standard” or
“2.Large” and then press the “OK” soft key.
Font size does not change in edit
screen even if you set font size to
large.
You can reach the Font Size menu
by pressing the following keys.
To go to the Font Size menu:
TIP
Back Light
12 OK Clear
10
S
TIP
Font Size
1.Standard
2.Large
OK Back
TIP