Filter
Top Products
Call Features
Page 40 Mitel
®
8568 Telephone User Guide – Issue 1, November 2009
Using Remote Programming to Change the Password
You can use Remote Programming to change the station (telephone) password.
To use Remote Programming to change the station password:
1. Do one of the following:
• Call your DISA number (provided by your system administrator). If necessary, enter
your (DISA) password.
• Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your password followed by #.
5. Dial 392.
6. Enter the new password followed by
#.
7. Enter the new password again followed by #.
Using Remote Programming to Change DND Settings
See “Using Do-Not-Disturb (DND)” on page 45 for more information about using DND.
To use Remote Programming to turn on DND:
1. Do one of the following:
• Call your DISA number (provided by your system administrator). If necessary, enter
your (DISA) password.
• Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your password followed by #.
5. Dial 370.
6. Enter the DND message number (01 to 20), and then enter the second-line message
text (if applicable).
To use Remote Programming to turn off DND:
Follow steps 1. through 4. above, and then dial 371.