Filter
Top Products
Start Here Guide
16
Additional components that are not supplied with the product, but are necessary to complete
the installation, include:
- PBX port to PBX-IP Media Gateway port cable (one per port)
- 8 RJ-12 phone cables
- Serial cable
- 10/100 BaseT Ethernet cable
The power requirements of the Power Supply Unit are as follows:
- Line Voltage: 90 to 264 Volts AC
- Frequency: 47 to 63 Hz
TIMGs
- One or two Dialogic T1 IP Media Gateway (TIMG) units.
The single T1/E1 connection TIMG is model TIMG300DTIV5, and the dual T1/E1
connection TIMG is model TIMG600DTIV5.
The TIMG, as shipped, consists of the following items:
- T1 IP Media Gateway Unit
- AC Power Cord
- Getting Started Guide
- Regulatory Notice
- Warranty Card
Additional components that are not supplied with the product, but are necessary to complete
the installation, include:
- PBX port to T1 IP Media Gateway port cable (one per port)
- 10/100 BaseT Ethernet cable
The power requirements of the TIMG Unit are as follows:
- Line Voltage: 90 to 264 Volts AC
- Frequency: 47 to 63 Hz
Analog Integrations:
- The analog model (PIMG80LS) of the PIMG.
IP Integrations:
- Mitel 3300 Integrated Communications Platform (ICP) Release 5.x or later, a
Universal Network Services Unit (NSU), and a fiber cable.
Note: The T1/E1 IP Media Gateway (TIMG) is now called the Dialogic 2000 Media
Gateway (DMG2000).
Note: These components must be ordered separately from Mitel.