Filter
Top Products
5312/5324 IP Phones User Guide
- 44 -
Place the Conference Unit in Presentation mode
Presentation Mode is used when only one individual is speaking to a group. If another
member in the group wishes to speak, you must disable Presentation Mode. Presentation
Mode minimizes extraneous noise.
To place the conference unit in Presentation mode
• Press Presentation Mode key on the mouse.
Mute the Conference Unit
To mute the conference unit so that conversation in the meeting room cannot be heard by
individuals being conferenced:
• Press the Mute button on the mouse or (MUTE) on the phone.
Exit the Conference
• Press Power key on the mouse.
Using the 5310 Conference Unit without a Mouse
Use the procedures below if you 5310 Conference Unit does not have a mouse attached. The
5324 IP Phone will activate the 5310 Conference Saucer when it detects that the Conference
Module has been installed in the back of the phone.
Start a Conference
• Press SPEAKER key or just start dialing.
Adjust the Conference Unit Volume
• Press Volume Up or Volume Down.
Mute the Conference Unit
To mute the conference unit so that conversation in the meeting room cannot be heard by
individuals being conferenced:
• Press
(MUTE) on the phone.
Exit the Conference
• Hang up.