Filter
Top Products
5312/5324 IP Phones User Guide
- 10 -
Emergency Calls
Warning for emergency number dialing: Consult your local authorities for Emergency
Numbers and 911 or equivalent service availability in your area. There are two methods of
dialing emergency numbers, based on the programming of your 3300 ICP:
• Emergency Call Routing NOT programmed
• Emergency Call Routing programmed
Caution: Verify with your System Administrator which type of emergency number dialing
you can use.
EMERGENCY CALLS WHEN EMERGENCY CALL ROUTING NOT
PROGRAMMED
If Emergency Call Routing is NOT programmed, Emergency Number dialing should only be
performed by picking up the handset and selecting the Line Interface Module key you have
programmed. If Privacy Mode is enabled and the Line Interface Module key local line is
busy, dialing will not occur on the Line Interface Module line. Emergency dialing using an
IP connection may not be supported due to ICP system configuration and country location.
For more information, contact your System Administrator.
To make an Emergency Call using the Line Interface Module line:
1. Lift the handset.
2. Press the Line Interface Module key that you have programmed.
The set indicates IP FAIL: ANALOG CALL
3. Dial your Local Emergency Number.
To make an Emergency Call using the Line Interface Module line, when the IP connection
has failed:
1. Lift the handset.
2. Press the Line Interface Module key that you have programmed.
The set indicates IP FAIL: ANALOG CALL.
3. Dial your Local Emergency Number.