Filter
Top Products
5312/5324 IP Phones User Guide
- 41 -
• If the call is external, and you normally need to precede external calls with a digit
such as 9, it is likely that your system administrator has programmed your system
to insert the 9 for you. In this case, pressing * or the Call softkey initiates the call
immediately. Sometimes the system will be unable to complete the dialing
automatically. When this happens, you can edit the dialed digits manually by
pressing # or the Å (Clear) softkey. Use the # or Å (Clear) softkey to delete the
left-most digit, and then type the digits to insert them. When you have the dial
string edited to suit your needs, press the * or Call softkey to dial the number.
To delete all missed, answered, or outgoing call logs:
1. After selecting the type of logs you wish to delete, press # or the Delete All softkey.
2. Confirm that you do want to delete all items by pressing * or the # softkey.
To delete a particular call from the call log:
• With the call log that you want to delete displayed, press # twice or press the
Delete softkey.
Night Answer
Office telephone systems are often placed into Night Answer after regular hours. Calls then
ring alternate answer points—either designated extensions or a night bell. You can dial the
Trunk Answer From Any Station (TAFAS) code to answer calls ringing the night bell. If
permitted by system programming, you can put your phone into one of two night answer
modes, Night1 or Night2.
To switch your 5312 IP Phone to Night Answer or back to Day service:
1. Lift the handset.
2. Press the Night Answer feature key. (See "Feature Key" for instructions on
programming a feature key.)
3. Do one of the following:
• Press 0 for Day Service.
• Press 1 for Night1.
• Press 2 for Night2.
4. Hang up.
The Night Answer feature key light flashes slowly for Night1, and rapidly for
Night2. The Night Answer feature key light is off for when your phone is in Day
service.