Filter
Top Products
16
SETTING THE FLASH TIME
This unit enables you to select the standard flash time applicable to your calling
area, which is useful when “clicking” over to a call waiting call or for PBX systems.
If you are not sure of the flash time, call your local telephone company. Set the
Flash Time while in the Standby mode as follows:
Press and hold the VOICE MAIL/
MENU button for more than two
seconds; the Ringer Volume setting
will appear in the display.
1
Press the Scroll Down button ❶ six
times or the 7 key button ❷; the Flash
Time setting will appear.
2
1
2
Press the EDIT/FLASH button to
change the setting; the Flash Time
setting will blink.
3
Press the Scroll Up ❶ or Down ❷
button to select a desired Flash Time
(in milli-seconds).
2
1
4
When the desired Flash Time setting
appears, press and hold the SAVE/
RE/PA button for more than two
seconds; a long beep will be heard to
confirm the setting has been saved.
5
You can continue with programming or
press the VOICE MAIL/MENU button
to return to the Standby mode.
6
SET-UP INSTRUCTIONS (CONTINUED)
MPH2410.O/M.QXD 3/7/03 9:35 AM Page 16