Memorex MPH2410 Cordless Telephone User Manual


 
12
SET-UP INSTRUCTIONS (CONTINUED)
SETTING THE FIRST RING
This feature will turn the first ring of the phone On or Off. Set to Off so the phone
does not ring until the Caller ID information has been displayed. Turn the first ring
option On or Off while in the Standby mode as follows:
Press and hold the VOICE MAIL/
MENU button for more than two
seconds; the Ringer Volume setting
will appear in the display.
1
Press the Scroll Down button twice
or the 3 key button ; the First Ring
will appear.
2
1
2
Press the EDIT/FLASH button to
change the setting; the First Ring
setting will blink.
3
Press the Scroll Up or Down
button to turn the First Ring On or Off.
2
1
4
When the desired First Ring setting
appears, press and hold the SAVE/
RE/PA button for more than two
seconds; a long beep will be heard to
confirm the setting has been saved.
5
You can continue with programming or
press the VOICE MAIL/MENU button
to return to the Standby mode.
6
MPH2410.O/M.QXD 3/7/03 9:35 AM Page 12