Filter
Top Products
13
SET-UP INSTRUCTIONS (CONTINUED)
SETTING THE TIME AND DATE
Change the Time and Date while in the Standby mode as follows:
Press and hold the VOICE MAIL/
MENU button for more than two
seconds; the Ringer Volume setting
will appear in the display.
1
Press the Scroll Down button ❶ three
times or the 4 key button ❷; the Time
Setting will appear.
2
1
2
Press the EDIT/FLASH button to
change the setting; the month setting
will blink.
3
Set the month using the Key buttons
(0-9). Repeat this step to set the date,
hour, and minutes; the AM/PM
indicator will then be blinking.
4
Press the 1 Key button to choose AM
❶ or the 2 Key button ❷ to choose
PM.
2
1
5
When finished, press and hold the
SAVE/RE/PA button ❶ for more than
two seconds; a long beep will be heard
to confirm the setting has been saved.
You can continue with programming or
press the VOICE MAIL/MENU button
❷ to return to the Standby mode.
1
2
6
MPH2410.O/M.QXD 3/7/03 9:35 AM Page 13