LG Electronics PDA PDAs & Smartphones User Manual


 
20
<Charging mode>
1.
When you recharge your phone after device switch off, the phone's LED
lights up red and displays a charging animation.
2.
When the phone is fully charged, the LED lights up green and the
animation stops.
3.
When the battery is fully discharged, the LED light is blinked and
animation is not displayed.
4.
During LED blinking, you cannot power on the phone to get sufficient
power for booting.
5.
As soon as charged power reach 1% (need 1 or 2 minutes), the LED blinking is stoped and charging
animation is displayed. And you can power on the phone.
6.
If you press and hold the power button for approx. 2 seconds in charging mode, the phone is turned on.
7.
If you disconnect the travel adapter from the phone in charging mode, the phone is turned off.
CAUTION!
•  When you charge a fully discharged battery, it may take over a minute for the display to respond. 
This is not a malfunction but completely normal.   
(If using a USB cable, it may take over 10 minutes.)
•  Do not force the connector as this may damage the phone and/or the charger.
•  If you use the charger out of your own country, use an attachment plug adaptor for the proper 
configuration.
•  Do not remove your battery or the SIM card while charging.
•  There is risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries 
according to the maker's instructions.
WARNNING
•  Unplug the charger from the mains and phone during lightning storms to avoid electric shock or fire.
•  Make sure that no sharp-edged items such as animal teeth or nails come into contact with the 
battery. There is a risk of this causing a fire.
Getting Started
Getting Started