Filter
Top Products
IB-PH5560-WC-E-040505
GETTING STARTED
Step 1: Checking the Package Contents
Your new PH-5560jumbo display Caller ID telephone has all the features of a 13 memory
telephone plus Caller ID display functions.
As you unpack this set, make sure you have the following items in the package.
4
INSTALLING BATTERIES
3.Replace the battery door and snap it shut (FIG. 3).
Step 2: Powering the Phone
Before you connect the phone cords, follow these steps to install the batteries:
1.Push down the battery door tab with a pen or other pointed object and lift the battery
door out (FIG. 1).
2.Insert 4 size “AA” alkaline batteries as shown inside the battery compartment (FIG. 2).
(The negative side (-) of the battery touches the battery spring.)
CAUTION
Make sure that the telephone line cord is disconnected before opening the battery
door. Replace the batteries when the low battery indicator
appears in the display..
•
When the batteries are dead, the display will not show anything. You can still make or
receive calls, but you can’t use the Caller ID or memory dialing.
•
When the batteries are dead, your data and settings could be erased.
FIG. 2
FIG. 3
FIG. 1
COILED HANDSET CORD
STRAIGHT TELEPHONE LINE CORD
HANDSET
TELEPHONE BASE
SHORTSTRAIGHT WALL CORD
(for wall mounting use)
TELEPHONE BRACKET (attach to
the back of the base for desk use)
IB-PH5560-WC-E-040505.pmd 4/8/2005, 10:49 AM6