Lenoxx Electronics H-5560 Telephone User Manual


 
IB-PH5560-WC-E-040505
CALLER ID FEATURES
Storing the Phone Numbers from the Caller ID List
As the phone keeps the data of up to 81 calls, if the 82nd call comes in, the phone
deletes the oldest data automatically.
To prevent important data from being deleted, you can store them into the 13 speed dial
memories (3 one-touch or 10 two-touch).
1.Display the phone number you want to store (by pressing UP or DOWN button).
2.Press STORE button. The display will show STORE OR ADJ, press CALL BACK
button to adjust the number. If the phone number is 10-digit, 1 is added automatically
in front of the 10-digit phone number.
NOTE:
1. Do not allow more than 3 seconds to elapse between each step of the procedure.
2. If the phone is connected to a Private Branch Exchange (PABX), you may need to
add an outside line access digit or a pause, see page 8.
3.
For one-touch memory
Press a one-touch speed dial button
(M1 to M3).
For two-touch memory
Press the AUTO button, and then one
of the speed dial memories (0 to 9).
The phone number is now stored in that memory button (NOTE: Only the number will be
stored, not the name).
10
Deleting the Data from the Caller ID List
To delete the Caller ID memory one by one
1.Display the Callers ID you want to delete (by pressing UP or DOWN button).
2.Press the DELETE button, the display will show DEL CALL?, press the DELETE button
once more, the display changes to show the next or previous call, and the data is deleted.
Calling back from the Caller ID List
A. When the Handset is on the Base.
B. When the Handset is Picked up.
1. Display the phone number you want to call back using the UP or DOWN button.
2.Press the CALL BACK button. the display will show PICKUP OR ADJ.
3. If the phone number is 7-digit (local call), phone number displayed is 7-digit, if you want
the phone number to be 10-digit (area code + phone number) or 11-digit (1 + area code
+ phone number), press the CALL BACK button once or twice more.
4. If the phone number is 10-digit, the phone number displayed is 11-digit (1 is added
automatically in front of the 10-digit phone number), if you want the phone number to be
10-digit, press the CALL BACK button once more.
5.Pick up the handset, the phone will dial the number displayed.
1. Display the phone number you want to call back using the UP or DOWN button.
2.Press the CALL BACK button. the display will show DIALING OR ADJ.
3. If the phone number is 7-digit (local call), the phone number displayed is 7-digit, if you
want the phone number to be 10-digit (area code + phone number) or 11-digit (1 + area
code + phone number), press the CALL BACK button once or twice more.
4. If the phone number is 10-digit, the phone number displayed is 11-digit (1 is added
automatically in front of the 10-digit phone number), if you want the phone number to be
10-digit, press the CALL BACK button once more.
5.The phone will dial the number displayed.
IB-PH5560-WC-E-040505.pmd 4/8/2005, 10:49 AM12