Filter
Top Products
IB-PH5560-WC-E-040505
WALL MOUNTING
1.HANDSET CLIP - When the phone is mounted on the wall, the HANDSET CLIP must
be adjusted so it will hold the HANDSET.
A. SLIDE OUT B. REVERSE C. REPLACE INTO PHONE
This phone can be mounted on a wall phone plate. If you do not have a modular wall
phone plate installed, please consult with your phone company or installer to get one, or
see next page for installation without a wall plate.
3.Plug the other end of the SHORT STRAIGHT
WALL CORD into the WALL JACK.
4.Put the phone over the WALL PLATE, make sure
both posts fit into slots on the back of the phone.
Then slide the phone down to lock the phone
onto the WALL PLATE.
11
Using Message Waiting/Mailbox
To use the Message Waiting indication feature, you must subscribe to this service if
available from your local telephone company.
Your PH-5560 will only respond to FSK type of message delivery.
1. If the message is sent by the telephone company which is preceded by a ring, the display
will show “MESSAGE WAITING” and the message waiting symbol
will appear in the
display and flash.
2. After you have retrieved your message(s), the telephone company will send a clear
signal (by a ring) to your phone. The message waiting symbol
will turn off, and
display shows
“ MSG WAITING OFF ”
.
3. Sometimes the telephone company will not send a message clear signal to you,
and you have to clear the message waiting record manually. Just press and hold the
DELETE button down and then press the UP button, the message will be cleared. The
message waiting symbol
will be off.
CALLER ID FEATURES
To delete ALL the Caller ID memories
1.When the phone is not in use, press the DELETE button and hold for 3 seconds, the
display shows “DEL ALL CALLS?”
2.Press the DELETE button once more, the display changes to “
NO CALLS
”
and all
the Caller ID memories (including the new call memories) are deleted.
NOTE: The new call indicator will flash when there are new calls in the caller ID memory.
It will be off when all new calls are viewed or all calls are deleted.
2.Use the SHORT STRAIGHT WALL CORD, and
plug one end into the rear of the phone.
Deleting the Data from the Caller ID List (continued)
IB-PH5560-WC-E-040505.pmd 4/8/2005, 10:49 AM13