4
FINDING YOUR WAY
Axxess
®
Model 8520 Phone User Guide
Feature Button Functions
The feature buttons are designed to automate some of the commonly-used functions,
such as dialing an outside number. Each of these is described in the table below.
In addition to the buttons identified in the preceding table, your phone has a Special
button ( ). Depending on how your telephone system is configured, you may need
to press this button before you dial a feature code.
NOTE: Because the telephone system allows customized feature buttons, your phone
may have been reprogrammed so that the feature buttons do not match those
described in this guide.
BUTTON IF YOU... YOU CAN... PG.
Press Answer a call. 20
Press and dial the number Place an outgoing call. 19
Press an unlit
button or the flashing
button
Select an outside line or answer a call. 19, 20
Press Access an intercom call. 16
Press unlit or lit Enable/disable Do-Not-Disturb mode. 38
Press
and dial the numbers you
would like to add to the conference
Place a conference call. 22
Press (International Hold Symbol) Put a call on hold. 21
Press and dial the destination
number
Transfer a call. 23
Press View or access System Speed-Dial num-
bers.
55
Press View or dial Station Speed-Dial numbers. 52
Press Choose a page zone to place a page. 57
Press Redial a telephone number or save the last
number dialed.
26
Press
and hang up Put a call on the speaker. 29
Press Leave or listen to a message. 31
Press Mute the microphone. 29
Press
and dial the destination num-
ber
Forward calls to the specified number. 25
Press the high or low end of the Volume but-
ton
Adjust volume during a call. 39
ANSWER
ANSWER
OUTGOING
OUTGOING
CALL
CALL
IC
IC
DND
DND
CNF CNF
TRANSFER
TRANSFER
SYS SPDL SYS SPDL
STN SPDL
STN SPDL
PAGE
PAGE
REDIAL REDIAL
MSG
MSG
MUTE
MUTE
FWD
FWD