Filter
Top Products
Installing and Replacing Desktop Board Components
45
Removing a PCI Express x16 Card
Follow these instructions to remove a PCI Express x16 card from a connector:
1. Observe the precautions in "Before You Begin" on page 27.
2. Remove the screw (Fi
gure 24, A) that secures the card’s metal bracket to the
chassis back panel.
3. Push the card ejector le
ver down using the tip of a pencil or similar tool
(Figure 24, B) in the notch. This will release the card from the connector (C).
4. P
ull t
he card straight up.
Figure 24. Removing a PCI Express x16 Card