Humminbird VHF255SW Two-Way Radio User Manual


 
64
DSC SETUP SUBMENU
The DSC Setup submenu under the Setup Menu allows you to set the following
information for the DSC/ATIS function:
The User MMSI assigned to your radio (can ONLY be set once).
Up to three Group Names and associated MMSIs.
Automatic or manual individual reply.
Whether DSC is enabled or temporarily disabled.
Automatic, manual or off position request reponse.
T
o access the DSC Setup Submenu:
1. From the Setup Menu, select DSC SETUP to display the DSC Setup Submenu.
(DSC Setup Submenu choices are: USER MMSI, GROUP MMSI, INDIV REPLY,
DSC ENABLE, POS REPLY.)
2. Rotate the CH/ENTER knob to select Items within the DSC Setup Submenu. To
confirm a selected item, push the CH/ENTER knob to see more submenus.
When you have selected the desired setting, press the CH/ENTER knob to enter
it, and return to the DSC Setup Submenu.
NOTE: To exit the DSC Setup submenu or one of the submenus under it, press the 16/9 key
(to exit out of all submenus, including the Setup Menu) or press the CANCEL/WX key (to step
back one menu level). You can also exit the DSC Setup Submenu by turning the unit off. All
changes are saved in EEPROM (except for manually-entered GPS data).
CONTACTS
LOCAL/DIST
BACKLIGHT
CONTRAST
GPS/TIME
RADIO SETUP
>DSC SETUP
RESET
EXIT
USER MMSI
GROUP MMSI
INDIV REPLY
DSC ENABLE
POS REPLY