Filter
Top Products
58
GPS/TIME SETTINGS SUBMENU: TIME DISPLAY ON/OFF
You can choose whether or not the time is displayed in Normal mode.
1. From the GPS/Time Submenu, select SETTINGS, then select TIME DISPLAY to
turn the Time Display ON or OFF.
2. Select ON to make the LCD display the time, and OFF to suppress the time. In
the following example, OFF is selected and the LCD no longer shows the time.
GPS/TIME SETTINGS SUBMENU: TIME OFFSET (LOCAL TIME)
You can set the time offset add/subtract value from UTC time to equal local time. When
this offset value is added, the time will be displayed as LOC instead of UTC.
1. From the GPS/Time Submenu, select SETTINGS, then select TIME OFFSET to set
a time offset.
2. Use the CH/ENTER knob to set the offset direction to be + or –.
3. Then use the CH/ENTER knob to set the number of hours of the offset in .5
(1/2) hour increments. The time will be updated immediately to reflect the
new time offset.
POS DISPLAY
TIME DISPLAY
>TIME OFFSET
TIME FORMAT
COG/SOG
TIME OFFSET
>+1.5 HRS
12:56 AM LOC
POS DISPLAY
>TIME DISPLAY
TIME OFFSET
TIME FORMAT
COG/SOG
TIME DISPLAY
ON
>OFF
COAST GUARD
27045.1234N
112036.5678W