Filter
Top Products
52
4a. Press the CH/ENTER knob to save the new Contact, which will be displayed at
the top of the Contact List.
or...
4b. Press the CANCEL key to terminate the process without saving, then go back to
the Contact List screen.
5. When the Contact List is full (has 20 entries), you cannot add a new entry until
you have deleted an existing entry.
T
o edit an existing Contact List entry:
1. From the Setup Menu, select CONTACTS. Rotate the CH/ENTER knob to
highlight a specific Contact Name and press the CH/ENTER knob to see the
EDIT and DELETE choices for the selected Contact Name and associated MMSI.
Choose EDIT.
2. When you are finished editing, press the CH/ENTER knob . You will be
prompted to save your changes.
3. Press the CH/ENTER knob again to save your edits. The Contact List is displayed
again. If more changes are required, repeat steps 1 through 3; otherwise, press
the CANCEL/WX key to exit.
T
o delete an entry from the Contact List:
1. From the Setup Menu, select CONTACTS. Rotate the CH/ENTER knob to
highlight a specific Contact Name and press the CH/ENTER knob to see the
EDIT and DELETE choices for the selected Contact Name and associated MMSI.
Choose DELETE.
2. Press and hold the CH/ENTER knob to confirm your changes. The Contact List
will be displayed again.
3. If you need to delete more Contact Names, repeat steps 1 through 2; otherwise,
press the CANCEL/WX key to exit.