Filter
Top Products
61
RADIO SETUP: CHANNEL NAME DISPLAY AND EDITING
You can associate a text name with a channel, and display the name on the LCD below
the channel number, or suppress the display of the name; you can also delete an
existing text name.
T
o display an existing channel name:
1. From the Radio Setup Submenu, select CH NAME, then DISPLAY to turn the
display ON or OFF using the CH/ENTER knob.
T
o edit an existing channel name entry:
1. From the Radio Setup Submenu, select CH NAME, then CH INFO, then press
the CH/ENTER knob. The screen will display the channel number and the name
associated with that channel. You can then use the CH/ENTER knob to scroll
through any other channel on the band, and press the CH/ENTER knob again
to edit or delete that channel name.
2. Select EDIT and press the CH/ENTER knob to edit the existing name tag, then
enter the new name over the existing name and press the CH/ENTER knob to
display the YES/NO confirmation message.
3. Press the CH/ENTER knob to confirm the new channel name, then press the
CANCEL key to return to the previous screen.
>CH NAME
RING
VOLUME
BEEP
VOLUME
INT SPEAKER
CH NAME
DISPLAY
>CH INFO
[Channel Label]
CH INFO
>EDIT
DELETE
>CH NAME
RING VOLUME
BEEP VOLUME
INT SPEAKER
CH NAME
>DISPLAY
CH INFO
DISPLAY
>ON
OFF