Filter
Top Products
55
GPS/TIME SUBMENU
The radio automatically detects NMEA strings and decodes the appropriate
latitude/longitude position and time. If the GPS navigation receiver is not connected
or is not functional, the radio will send an alert every 4 hours to request that you enter
manual GPS coordinates and time data. If you do not enter this data manually for 24
consecutive hours, the radio will stop sending the alert and will simply display NO
GPS on the LCD.
T
o access the GPS/Time Submenu:
1. From the Setup Menu, select GPS/TIME.
2. Rotate the CH/ENTER knob to select Items within the GPS/Time Submenu. To
confirm a selected item, push the CH/ENTER knob to see more Submenus.
When you have selected the desired setting, press the CH/ENTER knob to
enter it, and return to the GPS/Time Submenu. (GPS/Time Submenu choices
include MANUAL and SETTINGS. There are additional submenu choices
under SETTINGS.)
NOTE: To exit the GPS/TIME submenu or one of the submenus under it, press the 16/9 key
(to exit out of all submenus, including the Setup Menu) or press the CANCEL/WX key (to step
back one menu level). You can also exit the GPS/Time Submenu by turning the unit off. All
changes are saved in EEPROM (except for manually-entered GPS data).
CONTACTS
LOCAL/DIST
BACKLIGHT
CONTRAST
>GPS/TIME
RADIO SETUP
DSC SETUP
RESET
EXIT
MANUAL
>SETTINGS
POS DISPLAY
TIME DISPLAY
TIME OFFSET
TIME FORMAT
COG/SOG