Filter
Top Products
Managing the Battery
User’s Guide 3–5
Removing the Battery
To remove the battery from the iPAQ Pocket PC, lift the left side
of the battery and pull it out of the device.
Ä
CAUTION: Because most of the applications and data you install on
your iPAQ Pocket PC are held in memory (RAM), you need to reinstall
them if the battery completely discharges or if the battery is removed
from the unit for extended periods of time.
You do not need to reinstall applications and data installed in the
iPAQ File Store folder because they are saved in ROM.
Charging
To recharge the battery, use one of the following methods:
■ AC Adapter with the Charger Adapter
■ USB Synchronization Cradle/Charger with the AC Adapter
Charging with the AC Adapter and Charger
Adapter
The standard AC Adapter works in any household outlet. You can
also purchase one that works in your vehicle’s cigarette lighter or
a 12-volt power outlet.
Ä
CAUTION: Use only HP recommended AC adapters.
293146-001HamrUG.book Page 5 Friday, April 11, 2003 2:08 PM