Filter
Top Products
6 - 10
Configuring the Dolphin Terminal for Communications
The Dolphin terminal may be configured for communications using the Detectoid Communication Utility as described in Chapter
2 or manually as described below.
To set Communications Properties:
1. Select Start>Settings>Control Panel>Communications Properties.
2. Select the PC Connection tab.
3. Select Change Connection and choose the desired option for connecting to the desktop computer. Choose Direct if you are
using a serial connection; choose Infrared for a HomeBase connection; and IrDA for IntelliBase/IntelliBase+ connection or
USB HomeBase IrDA connection and click OK.
4. Place the Dolphin in the cradle.
5. On the Dolphin 7400/7450 desktop, double-tap on ActiveSync.
Communications Properties